The number of chickens is mostly kept in the chicken house. The temperature has a great influence on the chickens. After all, the chickens do not have sweat glands. During the brooding, the chicks are still relatively small and the resistance is very poor. The temperature requirements are relatively high. The suitable temperature guarantees the healthy development of the chicken and the laying of eggs in the later stage. If the temperature is high, the feed intake of the chicken decreases, the feed conversion rate decreases, the weight gain of the broiler slows down, the weight of the egg is reduced, the quality of the eggshell decreases, and the egg lays. The rate is falling and the mortality rate is rising in automatic poultry farming

The low temperature will increase the maintenance of chickens, slow growth, low temperature in winter and excessive temperature fluctuations in the house, which will reduce the resistance of the chickens, lower the eggs, and induce respiratory diseases in the flocks. This shows that the temperature is causing the poultry to appear. Heat stress, the primary environmental factor that affects the health and performance of the flock.

The chicken is a warm-blooded animal, and there is no sweat gland. The body temperature is kept constant by heat production and heat dissipation. In the case of excessive stocking density, the metabolic heat production of the chicken increases with the increase of the growth rate, but the heat dissipation capacity is not improved. The appropriate temperature for the chicken varies with the age of the chicken. Chicks have strict temperature requirements in the first few weeks and keep the house heating. For laying hens, the optimum temperature is 18 °C ~ 23 °C. At suitable temperature, laying hens have high feed utilization rate, strong disease resistance, high egg production rate and high economic benefits.

Low temperature will first increase the maintenance needs of the chicken, increase the meat-to-meat ratio of the broiler, decrease the egg production rate of the breeder, and reduce the resistance of the chicken to the disease. When the temperature of the house is too low in winter, the ventilation required for maintaining the temperature is not guaranteed. It will cause imbalance between temperature and ventilation management, resulting in an increase in the concentration of harmful gases such as ammonia in winter chicken houses. When the temperature difference in the house is large, especially when the outside temperature suddenly changes, heating or ventilation is not very good. Coordination, the temperature fluctuation in the house is too large, and the sudden drop in temperature will cause cold stress, which will cause the respiratory disease of the flock at the same time as the production performance declines in Chicken Breeding Equipment Machinery

Poultry feeding equipment consists of many equipments. The main equipment includes chicken battery cage system, drinking water equipment, feeding equipment, egg collection equipment and cleaning equipment. It is also used by farmers. In the actual use process, what equipment will have some small faults in the long-term use process, the author will tell the faults that farmers often use these equipments for the farmers to refer to.

1. When the manure is removed, only the roller is driven to rotate, and the manure belt does not move. The reasons for this failure are: there may be too much chicken manure; the rubber roller and the driving roller are not tight; there is a foreign matter stuck to the defecation belt.
Farmers can choose to use the following methods to solve: farmers should pay attention to the regular operation of the septic belt; if the rubber roller and the driving roller are not tightened, the farmer can tighten the expansion bolts at both ends of the driving roller to solve the problem; If the foreign matter catches the problem of clearing the dung belt, the farmer should remove the foreign matter in time.

2. The feeding car does not go: When using the feeding equipment, some farmers' feeding vehicles do not move. The cause of the fault is: driving the wheel, the rope does not move; the positioning plate on the driven wheel is not in contact with the travel switch; the track wheel and the guide rail are squeezed; the motor is damaged.
Farmers can solve the problem by: the farmer can rotate the ratchet of the material, tighten the rope; adjust the position of the travel switch to make contact; correct the guide rails to make them parallel; replace the motor.

3. The chicken manure on the manure belt is thin, the cause of the failure: the chicken manure on the manure belt is thin, which may be caused by water leakage from the drinker; or it may be that the joint at the sink is not well sealed. Another reason is that farmers should pay attention to the presence of chicken diarrhea in the chicken flock. Solution: Replace the drinker; apply sealant to the joint; treat with medication.

4. The egg breaking rate is high, the cause of the malfunction: chicken quail eggs; the eggshell is thin; the claws on the automatic egg collecting machine are broken. The eggs that fell off the cage net collided with the eggs on the egg belt. Eggs coming out of the automatic egg collection machine collide with eggs on the central egg line.
Solution: Farmers can choose to use electric shock lines to prevent chicken quail eggs. In addition, if it is the quality problem of the eggs, the farmers can pay attention to the replacement of the feed formula to enhance the quality of the eggs. Find the replacement of the broken egg; use the egg line; adjust the egg height to make it cushion.

5. The defecation belt runs off, the cause of the failure: the defecation belt runs off, the farmer can consider the rubber roller and the driving roller of the cleaning equipment, whether there is a phenomenon of non-parallel. Also pay attention to whether the ends of the faeces are different; and the cage of the cage is not straight. Solution: Adjust the bolts at both ends of the rubber roller to make them parallel; re-align the welding at the joint; re-correct the cage.

The above five points are the author's description of the common failures of using poultry farming equipment for sale and ways to solve the problem. I hope that the above description can help the farmers. In addition, farmers are reminded that in order to minimize the occurrence of equipment failures, farmers can regularly inspect and maintain the equipment to ensure the efficiency of equipment use.