Poultry breeding chicken cage washing procedure: The general cleaning procedure is: first outside and then inside, first general and then overall, first up and down, the principle of chicken cage from front to back.

1. Remove the chicken cage material line and water line equipment to the operation room.

2. Stay in the pipeline for at least 12H, and then rinse with clean water.

3. Clean the chicken manure and feathers around the chicken coop to improve environmental sanitation. There is no debris around the chicken house, and the items outside the house are neatly stacked.

4. Remove the roof and clean the dust and dirt on the scaffolding, roof beams and appliances.

5. The chicken manure on the floor and the floor of the chicken cage, and the entire chicken house should be cleaned. There is no chicken manure, chicken feathers, or dust in the house, so as not to block the sewer pipe during washing.

6. Clean the sewer pipes, drains, and sewage tanks to achieve drainage.

7. Before cleaning the chicken coop, cut off the main power supply in the house, and connect the washing machine and lighting power supply from the house, and connect the leakage protection switch to avoid electric shock accidents.

8. Clean the power distribution cabinet and power distribution box with a blower.

9. Before washing the chicken coop, spray the surface of the appliance with detergent through a low-pressure spray gun, and keep it in a wet or foamy state for more than 20 minutes. If a high-pressure spray gun is used at this time, droplets containing microorganisms will be generated, which will pollute the environment and people.

10. Then use a high-pressure spray gun to clean the contents of the chicken house from front to back. This is a prerequisite for the chicken coop.

11. When rinsing, use steel wire brushes to clean items such as cots, walls, etc. that are cleaned; clean up the dirt in the material bag in the shrinkage joint.

Regardless of whether it is a layer cage or a broiler cage before being cleaned and washed, employees can use insecticide fumigation for a period of time. In this way, arthropods and pests that are flying and lurking in crevices can be eliminated.

Now layer cages are one of the most commonly used poultry farming equipment for chicken farmers. Chickens live in chicken cages, making it easier for farmers to manage. However, it is also necessary to prevent chickens from getting sick, to ensure that the quality of sanitation work meets the standards, to pay attention to the situation of the chickens in real time and to effectively grasp the health of the chickens.

When constructing chicken house, farmers first choose a place with a sunny, flat terrain, high dryness, convenient water access, far away from the village, and convenient transportation. The chicken house must be built in a place with high terrain, convenient drainage, and good ventilation; the inside of the house should be a concrete floor to facilitate cleaning and disinfection, and a sandy playground should be set outside the door.

The second is to ensure that the chicken house is ventilated and has a suitable temperature. Observe the condition of the flock. If they are evenly distributed, move freely, and are relatively quiet, the temperature of the chicken house is just right.

The third point is to formulate scientific immunization procedures. To ensure the healthy life of laying hens, when purchasing vaccines, you must choose those produced by regular large-scale manufacturers. The amount of vaccine should be sufficient, the immunization program should be reasonable, and the immunization method should be correct. In the early stage, immunization by nasal drops, eye drops or mouth drops should be promoted, and injections should be adopted in the later stage.

To sum up, the above are the specific measures for disease prevention in layer cages shared by poultry cage system manufacturers for farmers. Hope there is a place that can help farmers.