Under the development of automation, the battery layer cage breeding mode has been widely recognized by the majority of layer farms. This breeding method has a small area and high space utilization. The layered cleaning of chicken manure can not only improve the utilization rate of chicken manure, but also It also reduces the degree of environmental pollution. At the same time, labor intensity is reduced and productivity is improved.
Due to the inconvenience of multi-layer cages, it is inconvenient to catch the chickens. The laying time for laying hens can be appropriately extended. Vaccines that require immunity, such as Newcastle disease, infectious bronchitis, avian influenza, and egg drop syndrome, should be completely immunized before being basketed. over. When the egg production rate reaches 5%, the prenatal feed should be replaced with peak feed. The refueling will take one week for the transition. At this time, the feed should maintain high quality and stable nutritional content, and do not change the finished feed and raw materials at will.
In order to ensure the service life of the equipment, lubricate the transmission parts such as the transmission sprocket and gears of the transmission box once a month when in use. Clean up the surface of the egg roller and the fecal roller in time to prevent the accumulation of debris from causing the fecal belt to burst or break the roller shaft. Clean up the impurities in the soft and broken egg collection tray in time. The ventilation system should be adjusted appropriately for side wall ventilation and roof ventilation according to the different seasons. Always keep the lighting bulb clean to prevent affecting the light intensity.
If only the driving roller rotates when cleaning manure, the manure conveying belt does not move, it may be jammed because of excessive chicken manure. The manure conveying belt should be operated regularly, and the expansion bolts at both ends of the driving roller should be tightened to remove foreign matter. If the chicken manure on the manure belt is thin, it may be that the drinking fountain is leaking, the connection of the water tank is not sealed well, and the chicken is diarrhea. It is necessary to replace the drinking fountain, apply sealant to the joint, and administer medicine for treatment.
If the egg broken rate is high, it may be due to the chicken pecking the egg, the egg shell is thin, the egg claw on the automatic egg collecting machine is broken, the egg rolling off the cage net collides with the egg on the egg belt, and it comes out of the automatic egg collecting machine. The egg collided with the egg on the central egg line. You can use the electric shock line to change the feed formula, find out the broken egg claw and replace it, use the egg blocking line to adjust the height of the egg picker to make it buffer.
During the operation of the equipment, it is strictly forbidden to observe the operation status of the equipment personally and open the related inspection ports for maintenance. During inspection, repair and maintenance, the staff must ensure that the main power switch is turned off and the main power switch is blocked, otherwise serious injury accidents may be caused. Two travel switches are installed on the head and tail of the machine, and the rail wheel of the feeder will stop running when it touches any one of the travel switches. Regularly check whether the travel switch is sensitive, and if it fails, replace it in time, otherwise it is easy to damage the feeder and even cause more serious consequences.