The Working Principle of The Automatic Feeding Machine of The Layer Cage System in The Poultry Farming Equipment

Twitter

Share on Tumblr

Automatic feeding machine equipment for layer cage system in poultry equipment. It is very common on medium and large farms. Not only saves time, but also reduces the labor of breeding personnel, and does not require many personnel. Only need to operate the equipment, the equipment can be automatically loaded. Let's take a look at the working principle of the automatic feeding machine for poultry farming equipment.

1. The frame is welded with good rectangular steel, which has a large bearing capacity and no deformation of the structure.
2. The walking power system is driven by an advanced cycloidal pinwheel reducer motor, which has no loss in driving. The failure rate is low, and the operation is stable, which improves the efficiency of the egg-laying area.
3. The walking system is driven by chains and sprockets, and the guide rails are laid with square steel, which makes the walking smooth and increases the contact area.
4. Thepoultryfeeding system of the automatic feeding machine of the poultry farming equipment adopts the design of core technology and is equipped with a homogenizer to ensure uniform feeding.
5. The power distribution system adopts Chint electrical appliances and limit switches, which automatically stop at the end of walking. Various electrical control systems can also be designed according to the needs of users.
6. The hoisting system of the automatic feeding machine of the chicken raising equipment consists of a flat conveyor and a vertical conveyor. The system controls the feeding through the photoelectric switch, which improves the work efficiency.

The above is the introduction of the automatic feeding machine of the layer cage system in the poultry equipment shared by the layer cage manufacturers. If farmers have any questions about other equipment, they can leave a message.